FPV Flight Controller

FPV Flight Controller
Details:
A drone is only as smart as the silicon steering it. Our BLADE F-Series drone flight controller family gives every pilot—from backyard beginner to pro racer—the processing headroom, sensor precision and plug-and-play ports that turn props into pure flight performance. Built around F4, F7 and H7 chips clocked up to 480 MHz, these fpv flight controllers crunch PID loops in microseconds, so your quad reacts faster than your thumbs can move.
Send Inquiry
Description
Send Inquiry

BLADE F-Series Drone Flight Controller Range – The Nerve Center for Every FPV Build

 

A drone is only as smart as the silicon steering it. Our BLADE F-Series drone flight controller family gives every pilot-from backyard beginner to pro racer-the processing headroom, sensor precision and plug-and-play ports that turn props into pure flight performance. Built around F4, F7 and H7 chips clocked up to 480 MHz, these fpv flight controllers crunch PID loops in microseconds, so your quad reacts faster than your thumbs can move.

 

Start with the essentials: dual ICM gyros mounted on vibration-isolating foam deliver 6-axis data accurate to 0.02°/s, erasing drift and smoothing HD footage without extra damping plates. Six UARTs come standard, so you can run GPS, HD VTX, radio and telemetry simultaneously-no soldering bridges, no compromise. Plug DJI, Walksnail, ELRS or Crossfire straight into clearly labeled JST ports; the board auto-detects protocol and baud rate, getting you airborne in minutes, not hours.

 

Soft-mount architecture and a 9 V/3 BEC keep video noise out of the HD link, while a 25.5 mm or 30.5 mm hole pattern drops into 95% of carbon frames, letting you move the same drone controller from 3-inch cine-whoop to 7-inch long-range rig without re-wiring. Betaflight, INAV and ArduPilot firmwares are pre-loaded; simply select your target, flash over DFU, and you're ready for angle-mode practice or full GPS waypoint missions.

 

Whether you need the best drone controller for a weekend toy or a redundant fly controller drone for commercial work, the BLADE F-Series scales with your ambition. Plug it, tune it, trust it-and let every flight feel like the first perfect hover.

 

PICTURE product-1000-1000 product-998-998
MODEL BALDE F7 ANALOG FC BALDE F7 DIGITAL FC
MCU STM32F722RET6 STM32F722RET6
GYRO ICM42688P ICM42688P
BEC INPUT:7-36V 3-6S LIPO INPUT:7-36V 3-6S LIPO
OUTPUT:5V 3A OUTPUT 1:5V 3A
OUTPUT 2:10V 3A
OSD AT7456E CVBS OSD AT7456E CVBS OSD
BLACKBOX 16MB FLASH 16MB FLASH
TARGET BALDE F7 BALDE F7 HD
PORT 8*PWM 5*UART 1*12C 8*PWM 5*UART 1*12C
ADC V-BATT/CURR-ESC V-BATT/CURR-ESC
BARO BMP280 BMP280
LED WS2812 LED STRIP WS2812 LED STRIP
MOUNTING HOLES 30.5*3.05 30.5*3.05
SIZE(mm) 36.5*37*5.2 36.5*37*5.2
WEIGHT(g) 11(without cable) 11(without cable)

Hot Tags: fpv flight controller, China fpv flight controller manufacturers, suppliers, FPV Flight Controller, Drone ESC, Drone flight controller, drone flight control, Drone Electronic Speed Controller, fpv drone controller

Send Inquiry